Installation Manual Instruction Manual

MODEL 9100 INSTALLATION MANUAL

This manual gives step-by-step procedures for completing the physical installation of a Model 9100 ATM.

This manual is divided into the following sections:

! ATM ENVIRONMENTAL / POWER PRECAUTIONS CHECKLIST. Describes the general environmental and

power requirements when installing the ATM. To help ensure proper operation of the ATM, ensure the

environmental criteria listed in this checklist are met.

! CABINET DIMENSIONS. Displays the dimensions for the cabinet(s), exterior control panel components,

and signage.

! INSTALLATION - STANDARD/CHEMICAL ANCHORS. Describes how to install the cabinet assembly using

standard (steel) or chemical anchor bolts.

Note: The anchor kits are NOT included with the unit. You must purchase these optional anchor

install kits.

! DISPENSING MECHANISM INSTALLATION. Describes how to install the TDM-100, SDD, and Minimech

dispensing mechanisms into the ATM security cabinet.

! POWER AND COMMUNICATION. Describes how to route the ATM to the facility power and communication

connections.

* NOTICE *

The Model 9100 ATM supports most models of TDM mechanisms (TDM-

100/150/200/250) including the Minimech and SDD. The TDM-100, SDD, and

Minimech are shipped separately and must be field installed. The rest of the

TDM family are shipped installed in the cabinet.

WHAT’S IN THIS INSTALLATION GUIDE

! APPENDIX A. Software License Agreement / Compliance/Emissions statements

! APPENDIX B. ATM Installation for Accessibility guidelines.