Installation Manual Instruction Manual

12
MODEL 9100 INSTALLATION MANUAL
1. Carefully inspect the shipping container for any damage and report any damage immediately to the
shipping company. Refer to the warranty information in the User or Service manual (as applicable) for
information about reporting shipping damage.
2. Remove the ATM cabinet from the carton by cutting the straps and removing the top of the box.
3. Remove the packing material from inside of the box.
4. Remove the silver key from the white plastic bag attached to the ATM wrapping.
5. Stand the unit up and walk it out of the shipping carton.
6. Remove the wrapping from the ATM.
The following procedure applies to installing the cabinet assembly using either standard (P/N 06200-00066)
or chemical (06200-00060) anchor kits. The anchor kits are not supplied with the unit.
UNPACK ATM
deriuqeRslooT
,sdnuoptoof06tsaeltaotelbatsujda,hcnerweuqroT
hcnerwtehctarro,hcnerwtnecsercelbatsujda
stniopllirdgnikr
amrof)tnelaviuqero(hcnupretneC
remmaHtekcos)mm91("4/3revirdwercstalfegraL
levelelbbuBhcnerwxob/tekcos"61/7s
elggogytefaS
noitcetorpgniraeH
,)mm21("2/1,)mm6("4/1
-edibrac)mm51("61/9dna
ta-stibllirdyrnosamdeppit
gnol
"6tsael
cirtceleytud-yvaeh"4/3
)remmah/yrator(llird
tlebtroppuskcaBrenaelcmuucavelbatroPhsurberiW
tiKrohcnAdradnatS
srehsawtalf"2/1
epyt-eveels"4/1-4x"2/1
stlobrohcna
stun"2/1
tiKrohcnAlacimehC
dnastunxeH
srehsaw
seluspacrohcnalacimehC
tniop-lesihcdedaerhT
sdor
CABINET INSTALLATION