/Installation Manual Instruction Manual

MODEL 8100 USER / INSTALLATION MANUAL

INTRODUCTION

This section of the manual covers preventive and corrective maintenance pro-

cedures appropriate for user personnel. The following areas are covered:

1. REPLENISHING RECEIPT PAPER. Describes how to replace a spent receipt

paper roll.

2. CLEANING THE ENCLOSURE. The proper way to clean the ATM housing.

3. CARD READER CLEANING. The recommended card reader cleaning technique.

*Important*

Only qualified service personnel are authorized to repair or

service the terminal. Should a malfunction occur, DO NOT at-

tempt to service the unit yourself! Contact your Triton certified

service provider!

REPLENISHING THE RECEIPT PAPER

NOTE: This operation must be completed with the AC power applied to the

ATM.

1. Open the top of the ATM by unlocking the top enclosure and pulling the

hinged door forward.

2. If paper remains on the roll, cut or tear the paper between the roll and the

printer.

** Caution **

DO NOT pull receipt paper back-

wards through the printer! This

may leave paper fragments that can

cause paper jams.

3. Use the receipt printer feed button (as shown in Figure 6-1) to feed the

paper through the paper path until all paper comes out the front of the

printer.

4. Remove the paper and spool from the paper bracket .