/Installation Manual Instruction Manual

MANAGEMENT FUNCTIONS

TRITON CONNECT

WIRELESS CONFIGURATION

ACCESS INSTRUCTIONS:

1. From the MAIN MENU screen, se-

lect CONFIGURE TERMINAL.

2. From the CONFIGURE TERMINAL

screen, select ATM MONITOR-

ING.

3. From the ATM MONITORING

screen, select TRITON CONNECT.

*Important*

If using, turn Triton Connect <ON>

after entering the Configuration

parameters.

DESCRIPTION:

The TRITON CONNECT function allows

the terminal operator to set up

parameters that control wireless

communications between the ATM and

Triton Connect PC-based software to

remotely manage your Triton Systems

ATMs. The following parameters are

accessed through this function and

described on the following pages:

# HOST NUMBERS

# ALARM NUMBERS

# TCP/IP CONFIGURATION

Note: You need to have the communication device (wireless,ethernet, dial-up

modem) installed before attempting to configure their respective settings.