/Installation Manual Instruction Manual

50
MODEL 8100 USER / INSTALLATION MANUAL
NETWORK SETTINGS
Description:
The NETWORK SETTINGS parameters are
provided by your host Network
Administrator. The TERMINAL IP
ADDRESS, SUBNET MASK, and GATEWAY
ADDRESS consist of a sequence of four
groups of numbers. Each group can be
up to three digits long and each group
is separated by a period (dot character),
as in this example: 123.3.01.99
Follow these steps to initially enter or
change the TERMINAL IP ADDRESS,
SUBNET MASK, and GATEWAY A DDRESS:
$ Select <Change> to blank the
current entry, if necessary.
$ Enter the first group of numbers
in the Address/Value using the
main keypad keys.
$ Enter a ‘dot’ character by pressing
the <Control> key, then the <0>
key Twice to select the period’,
then the <Right Arrow> key to lock
it in.
$ Repeat Steps 2 and 3 for the second
and third group of numbers for the
Address/Value.
$ Enter the fourth group of numbers
for the Address/Value.
$ Select <Enter> to save the Ad-
dress/Value entry or <Cancel> to
discard the changes.