/Installation Manual Instruction Manual

24
MODEL 8100 USER / INSTALLATION MANUAL
ACCESS INSTRUCTIONS:
1. From the CONFIGURE TERMINAL
screen, select CASSETTE SETUP.
2. From the CASSETTE SETUP
screen, select CASSETTE PARAM-
ETERS.
3. Select CASSETTE “A”, “B”, OR
“C” (cassette “D” will be
grayed out).
DESCRIPTION:
The following options will be available
from the CASSETTE SETUP screen:
3. Type. This describes the item in the
particular cassette: “Cash” or
“Non-Cash”. Default is “Cash”.
4. Service. This function displays
the current cassette status and
provides the option to place the
cassette either IN SERVICE or OUT
OF
SERVICE.
Note: For single cassette dispens-
ers, cassette “A” must be In Ser-
vice
5. Currency Data. Note: Does not
apply for TDM dispensers.
6. Cassette. Allows you to select an-
other cassette, if applicable.
CASSETTE PARAMETERS
*Note*
##
##
# Cassette “A” is for single
cassette dispensers.
##
##
# “CASSETTE LOCKING” feature
does not apply to single cassette dis-
pensers.
7. Description. Provides access to menus that let the operator enter a brief
description of non-cash only items in a cassette (Multi-cassette use only).
1. Set Bill Dimensions. Note: Does
not apply for TDM dispensers.
2. Value. Allows the operator to set
the value of a cash or non-cash
item in a particular cassette. Value
is the denomination of the cur-
rency or face value of the particu-
lar non-cash item.