Dimensions Guide

Document created from Powerbox.com - 30/06/2020
TWX7CS001
TWX7 1800W Contractor Saw Module 254mm
Precision contractor saw module designed for use with the Workcentre TWX7,
resulting in a full-featured saw table capable of professional results. Powerful 1800W
motor and precision 254mm TCT blade. Accurate 86mm blade height adjustment and
0-45° bevel angle adjustment for performing complex bevel cuts. Protractor gauge
and rip fence for performing rip cuts, cross cuts and mitre cuts. Dust extraction port
located below the table surface for efficient, unobtrusive dust removal. Easy to
assemble and configure and fully supported by optional accessories for extending
functionality.
Model: TWX7CS001
Product: 453844
Brand: TRITON
Region: United States
Category: Workcentre Systems
Sub Category: Workcentre
Version No: V.2.8
Version Date: 09/04/2019
Product Specification
Product Weight
33.5lbs
Power 15A
Voltage 120V~60Hz
No Load Speed 4500rpm
Bevel Range 0-45°
Blade Diameter 10"
Blade Type N/A
Blade Kerf 0.102"
Bore Diameter Blade - 5/8"
Cut Capacity - Rip 30-1/2"
Cut Capacity - 45° 2-7/32"
Cut Capacity - 90° 3-3/8"
Dust Port Size 2-1/2" / 1-1/4"
General Product Safety QC Question 01 Are there any sharp edges? If yes please give details
General Product Safety QC Question 02
Does the product give you any safety concern? If yes please give
details
General Product Safety QC Question 03
Function - Does the product do what it is intended to do? If no
please give details
General Product Safety QC Question 04
Size - Is the product size and shape it was specified to be? If no
please give details
General Product Safety QC Question 05
Full contents - Are all the parts present? If no, please specify
what's missing
What's in the box - 01 1 x Contractor Saw
What's in the box - 02 1 x Dust port adaptor
What's in the box - 03 1 x Push stick
What's in the box - 04 1 x Push stick holder
What's in the box - 05 1 x Mitre gauge
What's in the box - 06 1 x Rip fence
What's in the box - 07 1 x Rip fence arm
What's in the box - 08 1 x Blade guard
What's in the box - 09 1 x Riving knife
What's in the box - 10 2 x Multi tool
What's in the box - 11 1 x Manual
IP Rating IPX0
Module Length 26-3/4"
Module Width 16-1/2"
Plate Width 0.071"
Profile Size 1 Side Extension Support from Centre Line - 600mm/ 23 1/2"
Profile Size 2 Outfeed Support from Centre Line - 670mm/ 26 1/2"
Scale Imperial
Table Size 660 x 410 mm/ 26" x 16 1/4"
Table Height 290mm/ 11 1/2"
Type of bevel Right
Standard ATB EN847 - 1 Compliant
Component Specification