Owner Manual

3
TDM STiffener BrackeT
- Follow the appropriate procedure to shut down your particular ATM and remove power.
- Remove the reject and note cassettes.
- In the upper cassette area, remove the 2 (two)
screws and detent clips with the T20 torx driver.
Retain the detents, discard the screws.
Note the position of the mounting holes and right
side indentation in this view.
- Position the stiffener bracket in the rear of the
lower cassette area as shown. This bracket is blue
for clarication. Yours will be black.
Note the indentation on the right side of the
bracket
inSTallaTion proceDure
SecTion 1