Owner Manual

Triton Systems ©
9
      
A serial communication cable (p/n 09120-00923) is required to download the rmware from the PC to the serial
CDU dispenser. If your PC does not have a serial port, you will also require a USB-to-serial adapter (p/n 01260-
00019).
**Note**
Screen shots are indicative of what should be seen during the load process. Firmware versions and actual screens
may vary.
22. Unplug the unit data cable from the dispenser, if necessary. Attach the serial communications cable from
laptop/desktop computer to the dispenser.
23. Switch all four dip switches on the dispenser to the OFF position. If the dispenser is powered on when the
dip switches are ipped, press black reset button near the dip switches to set the dispenser into download
mode.
Reset
Button