Owner Manual

Triton Systems ©
8
18. Snip TY wraps securing cable harness to dispenser. Gently pull wiring harness from behind metal plates and
snip any TY wraps securing cable harness to other wires.
19. Unplug cable harness from dispenser main board at JP8.
20. Remove new cable harness from upgrade kit and plug into dispenser main board. You may use the old cable
harness as a guide. Connect rest of cable harness and secure with TY Wraps.
21. Reconnect the dispenser power cable to dispenser and available outlet or power supply.
A
B
C
D
E
F
G
H
Dispenser Main Board
JP8
Main Motor Encoder
(ENC)
New Emitter Sensor
B/R/R
1st CST Exit, Right (CTR)
B/R
Reject Gate (GAT)
B/R
Reject Gate (GAT)
BLK/Y
New Double Detect
Sensor Y/Y/BLK
H
B
C
E
A
F
D
G
1st CST Exit,
Right (CTR)
Y/BLK