Owner Manual

Triton Systems ©

21. Remove note stacker by inserting hands into the second and fourth openings of the note stacker and pressing

tabs inwards until component releases.

22. Using a Torx T10 screwdriver, loosen three screws on note stacker motor.

23. Reach in to the h opening and remove the note stacker timing wheel cover by gently squeezing sides and

sliding out.

tabs

note stacker

timing wheel

cover

24. Using needle nose pliers, remove the gold t-bar in the center opening and the wheel assembly underneath.

Retain for reinstallation.

25. Unplug the blue NS entry sensors, then snip NS entry sensor cable. Note cable path. Pull loose ends from

note stacker and discard.

gold t-bar

blue sensors

26. Flip note stacker over and remove the NS sensor holder by liing under bottom edge until it pops free. Dis-

card.