Owner Manual

Triton Systems ©

    

1. Unlock cassettes via Management Functions > Terminal Conguration > Cassette Setup > Cassette Parameters.

Uncheck All Cassettes Locked option, then choose OK on the warning screen.

2. Remove cassettes from dispenser.

3. Place power switch on the dispenser power supply to the o (O) position.

4. Using a Torx T20 screwdriver, remove the top cover from the dispenser. Retain screws for reinstallation.

5. Using a Torx T20 screwdriver, remove three screws securing handle to dispenser on each side. Retain for

reinstallation.

6. Using a Torx T20 screwdriver, remove ve screws securing side cover on dispenser. Retain for reinstallation.

7. Li side cover away from dispenser far enough to slide ground wires o of metal tabs on inside of cover,

then remove cover.

8. Remove all cables from white cable clips along the top feed channel.