Owner Manual

Triton Systems ©

Required Tools No. 2 phillips screwdriver

Kit 41017-00005 SCDU Upgrade Kit

Part # Description Qty

1 Count sensor emitter board 1

2 Count sensor receiver board 1

3 Cable 1

4 Spacers 1

**Note**

09120-00923 Serial Communication Cable and 06300-00007 Firmware Loader are necessary to complete the

rmware upgrade.

SCDU II and SCDU III dispensers require a second sensor channel connector on the dispenser main board to

function with the New Australian Polymer Upgrade Kit. If dispenser main board does not have the second con-

nector in the top le corner, a new dispenser main board must be purchased in addition to the upgrade kit.