Owner Manual
Triton Systems ©
11
If you are using a USB-to-serial adapter, you can determine the COM port to use by going to Control Panel >
Device Manager in Windows. Locate the USB-to-serial device name under ports. e COM port associated with
this device is shown.
27. Choose “scdu(0910XX).bin” for a SCDU Dispenser or “hcdu(0b12XX).bin” for an HCDU dispenser. e
green progress bar will advance as the load proceeds.
28. Click Start. e program will load onto dispenser. e status bar along the bottom will ll up with green as