Owner Manual

4
TDM DRIVE BELTS FIELD REPLACEMENT PROCEDURES
ff
ff
f
After Upper belt is
removed, remove the Drive Motor
belt off the inside pulley.
gg
gg
g
Reversing the process,
install the Drive Motor belt
FIRST
on the inside pulley (long belt).
Belts removed
hh
hh
h
Next, install the Upper belt
(small belt).
Start belt on pulleys. Slightly
“squeeze” the 2 pulleys and roll
belt/pulley until belt is installed.
ii
ii
i
After Upper belt is
installed, engage Drive Motor
belt to upper pulley. Reinstall belt
cover.
Drive motor belt on inside pulley
Roll Upper belt to
install on pulleys.
Belts installed