Owner Manual

3
TDM DRIVE BELTS FIELD REPLACEMENT PROCEDURES
NOTE: Remove power from the terminal before proceeding! These procedures require the mechanism be
removed from the ATM.
cc
cc
c
Remove belt cover by
loosening the phillip-head screws
or Torx screws, if applicable.
TDM-100
TDM-250 w/Billfish
Belt cover
dd
dd
d Disengage the Drive
Motor belt
FIRST by removing
from the top pulley (long belt).
Drive motor belt
ee
ee
e
Next, remove the Upper
belt (small belt).
Slightly “squeeze” the 2 pulleys
shown. Start belt off pulley and roll
belt/pulley until belt comes off.
Belt cover
Belts locations
“Squeeze pulleys slightly
Start belt off pulley
Upper
belt
Drive
motor
belt