Owner Manual

2
TDM DRIVE BELTS FIELD REPLACEMENT PROCEDURES
INTRODUCTION
This guide covers the steps for field replacement of the upper drive and diverter belts for TDM dispensing mechanisms. The kit
required is determined by the type motor installed on the mechanism. The tables below list the belt replacement kit needed for motor
type and the specific mechanisms. Note: The DC motor type (not Stepper) has a timing wheel for the driver motor.
SCOPE
This procedure applies to all service personnel involved in the process of maintaining or converting Triton ATMs.
DC motor
Timing wheel
DC (Stepper) motor
Billfish assembly
tiKtnemecalpeRtleBMDT
)22300-00160N/P(
revirdwercsspillihP/revirdxroT02#:deriuqeRslooT
rebmuNtraP noitpircseD epyTrotoM
)s(msinahceM
detceffA
10000-41130
reppU,tleB
)trohs(
llAwolebdetsilllA
10010-60040
rotoMevirD,tleB
)gnol(
)repp
etS(CD
)hsiflliBo/w(001-MDT
)hsiflliBo/w(051-MDT
30010-60040
rotoMevirD,tleB
)gnol(
CD
)leehwgnimit/w(
)hsifl
liB/w(001-MDT
)hsiflliB/w(051-MDT
)lla(002-MDT
)lla(052-MDT
75000-00170serudecorPtnemecalpeRtleBMDT