Owner Manual

6
SDD 20T Gear replacemenT
replacemenT proceDure
noTe:
- The text on the bearings should be facing outwards so it can be read during installation.
replace lever conTra anD Gear Spur 20T
- The new parts are marked with a WHITE DOT. Ensure that the dot is facing outwards upon reassembly.
- Using the eye glass magnier, ensure that the Lever Contra and 2 (two) Gear Spurs 20T’s have INA
HF0612KFR or ORIGIN written on the bearing, and a white dot afxed. Be sure to place them on the
shafts facing outwards.
Replacement is the reverse of removal.
- Install Lever Contra and C-clip #3
- Install 2 (two) Spur Gear 20T’s and C-clip #2
- Install pulley gear and C-clip #1
- Install belt
C-clip installation tool (typical)