Owner Manual

4
SDD 20T Gear replacemenT
- Remove the pulley gear from the shaft, using a small at screwdriver to pry off C-clip #1, as shown.
Retain the pulley gear for reinstallation.
Pulley Gear
C-clip #1
Removed
- Using a small at screwdriver, pry off C-clip #2, and then remove the 2 (two), Gear Spur 20T ‘s from
their shafts on the machine as shown.
C-clip #2
C-clip #1
Removing
gear #1
C-clip #2
Gear #1
Removed
Gear #2
Removed