manual

SYSTEM PARAMETERS

SET TIME AND DATE

The TIME and DATE tabs let you adjust the terminals displayed Time and Date. The default settings are

standard for the country/region selected on the REGION screen.

To change the TIME or DATE settings:

1. From the R

EGIONAL SETTINGS PROPERTIES screen, press the <CLEAR> key to activate the option tabs

at the top. Use the <ARROW> keys to select (highlight) the TIME (or DATE) tab.

2. Press the <CLEAR> key to move down through the available options. When an option is selected,

press the <A

RROW> key repeatedly to scroll the available selections.

3. Press the <E

NTER> key when all changes have been completed.

The default T

IME setting is represented by hours, minutes, and seconds along with AM or PM as appli-

cable.

 HOURS. It can be set as one (1) or two (2) digits (ie. 4 or 04), using either the 12 or 24-hour clock. (i.e.

4:00 in the afternoon can be displayed as 4:00:00 PM (with or without a preceding 0) or 16:00:00).

*NOTE*

In some cases, none of the standard settings may satisfy the requirements. A value can be manually entered

in the field by pressing the <F8> function key which will display an on-screen keyboard. Use the 8 (up),

0 (down), and the <A

RROW> keys to navigate around the keyboard. Press the <ENTER> key to make a

selection and save the value in the field.

 TIME SEPARATOR. The colon (:) is the default time separator (i.e. 4:00 PM)

 AM and PM symbols. Defaulted to AM and PM