manual

SYSTEM PARAMETERS

SET THE DATE

1. SET THE MONTH. When the date/time properties dialog is

displayed, the month is highlighted. If for some reason it is

not, press the <CLEAR> key as needed to highlight it.

Once it is highlighted, you can use the <A

RROW> keys on the

keyboard to choose the month.

2. S

ET THE YEAR. Highlight the current year value.

3. SET THE DAY. Move the highlight mark into the calendar area

(not the dotted border around the currently highlighted day)

and then use the arrow keys to select a day.

SET THE TIME

1. SET THE HOUR. Move the highlighted mark into the time-set

area. The hour is highlighted first. Enter the hour using the

numeric (0-9) keys on the keypad.

2. SET THE MINUTE. Move the highlighted mark again to select the minute setting. Enter the minute

using the numeric (0-9) keys on the keypad.

3. SET THE SECONDS. Move the highlight mark again to select the seconds setting. Enter the seconds

using the numeric (0-9) keys on the keypad.

4. S

ET THE AM/PM INDICATOR. Move the highlight mark again to select AM or PM. Press the arrow

keys to choose the appropriate setting.

ET THE TIME ZONE AND DAYLIGHT SAVINGS SETTING

To change the time zone setting, press the <CLEAR> key as needed to highlight the title of the date & time

dialog tab. Press the Right (>) arrow key to move the highlight to the title of the time zone tab.

Follow these steps to change the time zone and daylight savings settings:

1. SET THE TIME ZONE. Press the <CLEAR> key on the keypad to highlight the list of time zones. Use the

<Arrow> keys to select a time zone.

Move the highlight mark to the “D

AYLIGHT SAVINGS” option. Press the <CTRL> key to enable

(checked) or disable (unchecked) the option. Note: This option unavailable for X2 equipped units.

CCEPTING THE DATE/TIME SETTINGS

Once the date/time settings have been configured, move the highlight mark to the OK command button.

Press the <ENTER> key on the keypad to accept or <CANCEL> to exit without making any changes.