Owner Manual
2
MODEL RT2000 (X2) INSTALLATION GUIDE
WHAT’S IN THIS INSTALLATION GUIDE
SITE COMPLIANCE. States the customers responsibilities for ensuring all relevant regulations, codes,
and laws are adhered to for installing ATMs.
ATM ENVIRONMENTAL PRECAUTIONS CHECKLIST. Describes the general environmental precautions and
the ATM, ensure the environmental criteria listed in this checklist are met.
DIMENSIONS. Describes physical dimensions for the cabinet(s), control panel components, and signage.
¾Physical dimensions.
¾Service area dimensions.
¾Customer access dimensions
INSTALLATION. Describes site preparation for exterior wall or vestibule locations. Instructions provide
the physical dimensions of the cabinet and associated hardware items. Optional platforms (“plinths”)
available in 2 sizes expedite raising the unit, if needed: 3” [76mm] or 6” [152mm].
INTRODUCTION
POWER AND COMMUNICATION. Shows cable access area, power requirements, and powering-up the unit.
APPENDIX A. Software License Agreement / Compliance/Emissions statements
APPENDIX B. ATM Installation for Accessibility guidelines.
INSTALLING /CONNECTING THE REAR OPERATOR SERVICE PANEL (RSP). Describes how to install and
connect the RSP.
The Triton RT2000 is a self-serviced, weatherized terminal adaptable for any suitable exterior (or interior)
wall or vestibule location. The cabinet design allows installation for maximum wall thickness up to 11-1/2”
[279mm]. Built-in leveling feet and optional platforms (“plinths”) allow the unit to be raised to the desired
height of the wall opening. The following section provides the physical dimensions and requirements for
installing the RT2000 for your particular site location. To assist you in preparing your site, a check list is
provided of various procedures that should be carried out prior to the arrival of the ATM.
DOCUMENT UPDATES:
Dec 11 2009 Page 30-31 Added warning to install RSP properly