Owner Manual

16
MODEL RT2000 (X2) INSTALLATION GUIDE
TOOLS / ITEMS REQUIRED

Lifting/moving devices
(pallet jack, forklift, lifting jack/trolley, etc)
Crowbar / roll bars,
scrap lumber (blocking)
Tape measure / bubble level / framing square Hammer / chisel
Back support belt / safety goggles,/mask
steel-toed shoes
Marker / pencil
Tool kit consisting of:
Adjustable wrench (large), box wrenches (open / closed) - up to 1-1/4” (32 mm)

Water-resistant sealant (caulk, etc)


Torque wrench, adjustable to at least 60 foot pounds,
adjustable wrench, or ratchet wrench
Center punch (or equivalent) for marking drill points
Hammer 3/4” (19 mm) socket 
Bubble level
7/16” (11 mm)
socket / box wrench
Safety goggles
Hearing protec-
tion
1/4” (6 mm) , 1/2” (12 mm),
and 9/16” (15 mm) carbide-
tipped masonry drill bits - at
least 6” (152 mm) long
3/4” (19 mm)
heavy -duty electric drill
(rotary/hammer)
Back support belt Portable vacuum cleaner Wire brush
1/2” (12 mm)

1/2” (12 mm) x 4-1/4” (107
mm) sleeve-type anchor bolts
1/2” (12 mm) nuts