Owner Manual

15
MODEL RT2000 (X2) INSTALLATION GUIDE
DETERMINE IF PLINTH REQUIRED
Triton Systems offers two (2) metal-constructed optional plinths w/leveling feet. A “plinth” is a platform on
which the ATM rests or is secured. A plinth enables the ATM to be installed at the required height through
the wall. The plinths come in 2 heights: 3” [76mm] and 6” [152 mm - shown below]. You can raise the
plinths leveling feet. Recommenda-
tion: When using the leveling feet, do not exceed 3/4”in adjustment. To determine if you need to order
a plinth with your unit, a few measurements will be needed at the site.
For sites that currently have a wall opening:
 
2. Cabinet dimensions are 28” from bottom of sleeve to base of cabinet (Figure 2).
3. Subtract the difference to determine if a plinth is needed or what height plinth to order or build. If

not
Figure 1. Determine height of opening

c
d
e
28”
(711mm)
Figure 2. Height of cabinet base
to bottom of sleeve (28”).
c Leveling feet
d Anchor holes
e Cabinet/Stack holes