Owner Manual

5
X2 MAIN BOARD REPLACEMENT (MODEM/PRINTER VERIFICATION)
4. Press <3>, CONFIGURE PRINTER. Press the <CLEAR> key to scroll down/highlight the “Reset All” option. Press the
<ENTER> key.
5. Perform another DEVICE STATUS to verify “Presenter Installed” and “Presenter Stored” status are the same. Also
verify if the “Device Status” line item reflects: 0 (Device Ready).
Printer w/presenter
Note: Recommend perform a RESET\TEST PRINTER function <OPTION 2>. This function re-initializes and performs an
operational test of the printer.