Owner Manual

X2 MAIN BOARD REPLACEMENT (MODEM/PRINTER VERIFICATION)

5. When the “LOOK IN” option has “USB” present,

the “FILES OF TYPE” screen should have the

Multitech load file software, size, and date/time at-

tributes (and any other file loaded in the Flash drive.

See NOTE, right.

6. Use the left and right <ARROW> keys on the keypad to highlight/select the following file:

X2MultitechModemCfg.tfv

7. A screen will appear below verifying the selected file. Press <ENTER> to continue.

8. The terminal will restart at this time and the installation of the software will be performed automatically. After the

terminal completes it’s reboot sequence, remove the Flash drive device.

* NOTE *

X2 TERMINAL SOFTWARE IS IDENTIFIED WITH A .TFV

EXTENSION.