Owner Manual

A-13
APPENDIX A - LOADING SOFTWARE / KEY MANAGEMENT PROCEDURES
CHECK OPERATION OF PRINTER/PRESENTER
1. Enter MANAGEMENT FUNCTIONS > MAIN MENU screen. Select DIAGNOSTICS option <2> , then PRINTER option <6>.
2. Press <1>, DEVICE STATUS. A Management report is displayed.
3. Scroll down to the “PRESENTER INSTALLED” and “PRESENTER STORED” line items. If there is a difference in the status report
between either (ex: “Presenter Installed”: YES , “Presenter Stored”: NO), proceed to the next step.
4. Press <3>, CONFIGURE PRINTER. Press the <CLEAR> to scroll down/highlight the “Reset All” option. Press the
<ENTER> key.
5. Perform another DEVICE STATUS to verify “Presenter Installed” and “Presenter Stored” status are the same. Also verify if the
“Device Status” line item reflects: 0 (Device Ready).
Note: Recommend perform a RESET\TEST PRINTER function <Option 2>. This function re-initializes and performs an operational
test (printout) of the printer.