Owner Manual

A-8
T5 PCI-EPP CONVERSION PROCEDURES
Clear Serial #
Error
4
CLEAR SERIAL # ERROR
After installing the T5 PCI-EPP, you will get a “Serial # Error”. In this event (and you must clear this error before entering
keys in Key Management), option <4> will be an available option (active). Select this option to clear the error. The option will
revert to “Grayed” out if the error hass been cleared.
ACCESS INSTRUCTIONS:
1. From the MAIN MENU screen, select DIAGNOSTICS by pressing <2> on the keypad.
2. Select KEYPAD by pressing <8> on the keypad.
3. Select option <4> if active to clear Serial # error.