Owner Manual

A-2
T5 PCI-EPP CONVERSION PROCEDURES
UPDATING TERMINAL SOFTWARE (RL/FT5000/RL/RT2000)
This step procedure describes how to perform a software update for the RL/FT5000/RL/
RT2000. You will need a Flash drive device (USB storage device shown) with the terminal
software loaded in it (CD included in kits have software files specific for model ATM).
1. (for X-Scale units) Locate the DOCKING BOARD assembly
in the unit. Connect the Flash drive to any available USB
port.
1A. (for X2 units) Locate the MAIN BOARD assembly in the
unit. Connect the Flash drive to any available USB port.
2. If your Flash drive has an indicator, it will light briefly, then extinguish. When light extinguishes, this indicates the
storage device has been found by the operating system of the ATM. If your Flash drive does not have an indicator, proceed
to the next step.
3. Enter MANAGEMENT FUNCTIONS > MAIN MENU screen.
Select the SYSTEM PARAMETERS option by pressing <5> on
the keypad.
4. Press <7> on the keypad to access the SOFTWARE
UPDATE function. This function searches for the terminal soft-
ware setup program on the external storage device.
* NOTE *
To update software for Models FT5000 and RT2000, access
Management Functions from the front display (customer side).