Owner Manual

14
T5 PCI-EPP ConvErsIon ProCEdUrEs
rEMovE sCrEws FroM THE dIsPlay assEMBly - UsIng THE FIgUrE aT lowEr rIgHT as a gUIdE, rEMovE THE FoUr (4) PHIllIPs-HEad
sCrEws FroM THE dIsPlay assEMBly. THE FIgUrE BElow lEFT sHows THE aCCEss HolE loCaTIons on THE dIsPlay BraCkET.
“genTly” lIFT THE dIsPlay assEMBly UP To gET aCCEss To THE FUnCTIon kEy CaBlEs. dIsConnECT and rEMovE THEsE CaBlEs
FroM THE ConTrol PanEl. noTe: you May haVe To cuT soMe Ty wraPs To reMoVe.
Left
Right
*** CAUTION ***
When lifting the Display assembly, secure the display glass with one hand to prevent
glass from possibly separating from display and breaking.