Owner Manual

11
T5 PCI-EPP ConvErsIon ProCEdUrEs
8” Display Assembly.
lIFT grEEn HandlE TaB on x2 MaIn Board and slIdE assEMBly BaCk. rEMovE x2 MaIn Board FroM THE doCkIng Board
BraCkET. THE ‘rIgHT’ sIdE FUnCTIon kEy CaBlE Can BE aCCEssEd In THE arEa sHown In FIgUrE BElow rIgHT.
8” dIsPlay FUnCTIon kEy CaBlEs (rEMovE/rEPlaCE):
THE FIgUrEs BElow ProvIdE a BasIC vIEw oF wHErE THE FUnCTIon kEys arE In rElaTIon To THE dIsPlay CasE.
dIsConnECT THE “rIgHT” sIdE FUnCTIon kEy CaBlE sHown . nExT, dIsConnECT THE ‘lEFT’ sIdE FUnCTIon kEy CaBlE sHown.
rEMovE THEsE CaBlEs FroM THE ConTrol PanEl. noTe: you May haVe To cuT soMe Ty wraPs To reMoVe.
Right side cable location. Left side cable location.