Owner Manual

LIGHTED HIGHTOPPER - FIELD INSTALLATION GUIDE
6
Instructions for Checking the Topper Light Bulb
(AC-powered only)
1. Lay the Topper on a flat surface, rear side down, as shown in Figure 1.
Unlock the topper sign panel and lift the sign panel up. It may be necessary
to tilt the assembly to keep the panel opened.
2. Locate the light bulb (Figure 2). The best way to ensure the bulb is firmly
seated in the socket is to carefully remove and then reseat the bulb.
Note: If the bulb is bad, carefully remove the existing bulb and replace
with a new bulb.
3. Close and lock the sign panel.
Figure 1. Topper sign panel opened.. Figure 2. Location of light bulb.