Owner Manual
2
WHaT’s IN THIs INsTaLLaTION GUIDE
This Installation Guide gives step-by-step procedures for completing the physical
installation of a Triton RL5000
XP
. This guide covers cabinet and dispenser instal-
lation (if applicable) for RL5000
XP
units equipped with an NMD-100 dispensing
mechanism. The Installation Guide is divided into the following sections:
COMPLIaNCE NOTIfICaTIONs.
aTM INsTaLLaTION fOR aCCEssIbILITy. Describes the basic Americans
with Disabilities Act (ADA) requirements for ATM location and access.
Note: These are the general requirements that should be applicable to most
installation locations. Please verify the specic requirements with the state
where the ATM is to be installed prior to installation. For state contact
information, you may call the ADA information line at 1-800-514-0301.
aTM ENvIRONMENTaL PRECaUTIONs CHECkLIsT. Describes the general
environmental precautions considered when installing the ATM. To help
ensure proper operation of the ATM, ensure the environmental criteria listed
in this checklist are met.
CabINET INsTaLLaTION - sTaNDaRD aNCHORs. Describes how to install the
ATM cabinet using standard (steel) anchor bolts.
CabINET INsTaLLaTION - CHEMICaL bOLTs. Describes how to install the ATM
cabinet using a chemical anchoring process. Note that to install the cabinet
according to these instructions you must purchase the optional chemical
anchor install kit (Part Number 06200-00060).
POWER aND COMMUNICaTION. Describes how to connect the ATM to the
facility power and Ethernet connections.
DIsPENsING MECHaNIsM INsTaLLaTION. Describes how to install the NMD-
100 dispensing mechanism into the ATM security cabinet.
RL5000
XP
INsTaLLaTION GUIDE