Owner Manual

11
aTM INsTaLLaTION fOR aCCEssIbILITy
(b) Reach Depth More Than 10
inches (255 mm). Where the reach
depth to the operable parts of any
control as measured from the vertical
plane perpendicular to the edge of the
unobstructed clear oor space at the
farthest protrusion of the automated
teller machine or surround is more
than 10 inches (255 mm), the maxi-
mum height above the nished oor
or grade shall be as follows:
(3) Forward and Parallel Ap-
proach. If both a forward and parallel
approach are possible, operable parts
of controls shall be placed within at
least one of the reach ranges in para-
graphs (1) or (2) of this section.
ACCESSIBILITY SPECIFICATIONS
REACH DEPTH MAXIMUM HEIGHT
Inches Millimeters Inches Millimeters
10 255 54 1370
11 280 53 1/2 1360
12 305 53 1345
13 330 52 1/2 1335
14 355 51 1/2 1310
15 380 51 1295
16 405 50 1/2 1285
17 430 50 1270
18 455 49 1/2 1255
19 485 49 1245
20 510 48 1/2 1230
21 535 47 1/2 1205
22 560 47 1195
23 585 46 1/2 1180
24 610 46 1170
EXCEPTION: Where a function
can be performed in a substantially
equivalent manner by using an alter-
nate control, only one of the controls
needed to perform that function is
required to comply with this section.
If the controls are identied by tactile
markings, such markings shall be
provided on both controls.
4.34.4 Controls. Controls for user
activation shall comply with 4.27.4
(Operation).
4.34.5 Equipment for Persons
with Vision Impairments. Instruc-
tions and all information for use shall
be made accessible to and indepen-
dently usable by persons with vision
impairments.
(20) Where automated teller
machines (ATMs) are provided, each
ATM shall comply with the require-
ments of 4.34 (Automated Teller
Machines) except where two or more
are provided at a location, then only
one must comply.
EXCEPTION: Drive-up-only auto-
mated teller machines are not required
to comply with 4.27 (Controls and
Operating Mechanisms and 4.34.3
(Reach Ranges).
(4) Bins. Where bins are provided
for envelopes, waste paper, or other
purposes, at least one of each type pro-
vided shall comply with the applicable
reach ranges in paragraph (1), (2), or
(3) of this section.