Owner Manual

4
8. Plug the phone cable into the modem “Line In” port.
9. Plug the modem power cable and the modem data cable into the modem. Route the data cable from the
modem, under and around the other cables, and plug it into the “Auxiliary” port on the docking board.
10. Route the power cable under all the other cables and plug it into the unit power supply.
11. Push the AC power ON/OFF switch on the power supply to the ON (I) position. Load the modem kit
software to the unit. When complete, the unit will need to be restarted to recognize the new software/parts.
03011-01606 BRACKET OR NO BRACKET cont...