Manualshelf

Owner Manual

ManualsBrandsTriton Systems ManualsOtherRL5000 Xscale Series
9101112131415161718
14
XSCALE SERIAL MODEM REPLACEMENT
15. Plug the Power Connector Splitter Cable into the power supply. If there are no open ports, unplug a
cable, plug it into the second jack on the power splitter cable and plug the splitter into the power supply.
13. Plug the Modem Power Cable into the “Power” port on the side of the modem. Route the Modem
Power Cable around the back of the modem and down.
14. Plug the Modem Power Cable into the Power Connector Splitter Cable as shown below.