Manualshelf

Owner Manual

ManualsBrandsTriton Systems ManualsOtherRL5000 Xscale Series
9101112131415161718
FIELD REPLACEMENT PROCEDURE
13
10. Line the two posts on the bracket up with the two slots on the back of the modem. Slide the modem in
towards the bracket until it snaps into place.
12. Plug the Modem Communication Cable into the “Serial” port on the side of the modem. Route the
Modem Communication Cable around the back of the modem and plug into the Adapter Jack as shown.
11. Plug the Phone Cable into the “Line In” port on the side of the modem. If the unit does not have a
previously installed phone cable, use the Phone Cable supplied in the kit.