Owner Manual

XSCALE SERIAL MODEM REPLACEMENT

To Remove the Modem Assembly:

1. Put the ESD wrist strap on and attach the cord to ground.

2. Perform a proper shut down of the unit.

3. Perform a proper shutdown of the unit. Unlock and open the upper portion of the cabinet.

4. Push the AC power ON/OFF switch on the power supply to the OFF (0) position.

5. Remove the current modem from the unit. Remove all modem cables EXCEPT for the phone cable.

NOTE: if the unit previously had the Zoom Modem installed, discard the phone cable. It is

not compatible with the new kit. Use the phone cable provided. See picture below for reference.

6. If the unit has a Multitech modem bracket installed on the top of the display bracket, remove the bracket

and discard. Set the screw aside for reinstallation. If the unit already has the correct modem bracket

installed, do not remove.

Zoom Modem Phone Cable - Discard