Owner Manual

FIELD REPLACEMENT PROCEDURE
9
After installing the software to enable the serial modem, the modem
settings in diagnostics will show the following:
Modem / Ethernet
Device ID: Triton Modem
Host:
Baud Rate: 57600
Byte Size: 8
Parity: None
Stop Bits: 1
Modem Setup String: \N0&H6&G4
Triton Connect:
Baud Rate: 57600
Byte Size: 8
Parity: None
Stop Bits: 1
Modem Setup String: \V2&H0
NOTE:
Before proceeding, swap out the unit’s main
board with the supplied main board loaded with
the updated software.