Owner Manual

Triton Connect 5.5 SP1 Release Notes
Triton Systems Page 3 of 4 September 30, 2011
1 Introduction
This document describes changes made to the Triton Connect 5.5 SP1 software release.
This document describes changes from the 5.5 release.
2 Platforms Affected
2.1 Hardware Requirements
A new comloc will be required if upgrading from 4.x. The part number for the comloc is
05000-0005.
2.2 Software Releases
Build Version: 5.5.6
Build Date: September 28, 2011
Operating Systems: Windows 2000 and Windows XP
Installation instructions:
- Download “Triton Connect 5.5 SP1.zip” from Triton website.
- Extract to local hard disk.
- Browse to “Triton Connect 5.5 SP1/Install Files”.
- Execute “Launch.exe” by double-clicking.
- Select desired component to install.
2.3 External Dependencies
None
3 Description of New/Modified Features
3.1 TDL Gateway Modem Support
This release of Triton Connect adds support for dynamic IP addresses for the TDL
Gateway cellular modem. If the IP address of an ATM using a TDL Gateway modem
changes, Triton Connect will be notified and the IP address it stores for the terminal will
automatically be updated in the Triton Connect database.