Owner Manual

3
INTRODUCTION
INTRODUCTION
PURPOSE
This guide covers the steps for installing a new Security Module (SM). The new module adds additional
security to the mainboard to dispenser communications path. These procedures include a list of all tools
and hardware necessary for the replacement as well as the steps involved.
SCOPE
These procedures apply to all VERIFIED TRITON TRAINED service personnel involved in the process
of maintaining or converting Triton ATMs.
APPLICATION
This conversion kit applies to the Traverse model ATM. If you have any questions contact Triton Technical
Support.
NOTES
SOFTWARE DEPENDENCY
It is unlikely but possible that your unit will not recognize the new Security Module with your current
software. Please visit the Triton web site (http://www.Triton.com) for the latest version, or contact Triton
Technical Support.
UNIT CONFIGURATIONS
Due to production, rehab, update, or repair differences, your unit may vary in hardware, or, cable color,
length, and routing, as compared to the examples given. These instructions are representative of the
upgrade for each type of unit. Your units appearance may vary.
TOOLS
The use of magnetic implements may be helpful in the removal and replacement of some hardware.
KITS
Due to the versatility of the kit, there will be parts that are not used in your particular unit.
ADDITIONAL NOTES
IT MAY BE BENEFICIAL TO ASSEMBLE THE SECURITY MODULE, CABLES AND BRACKET INTO A COMPLETED
ASSEMBLY BEFORE GOING TO YOUR PARTICULAR SITE.