Quick Reference Guide

5
UNLOCK/OPEN DISPENSER
SECURITY
DOOR. RELEASE
THE
SLIDE LOCKING LEVER
AND
EXTEND THE DISPENSER
MOUNTING
TRAY FULLY.
REMOVE REJECT CASSETTE.
UNLOCK AND REMOVE ANY
NOTES
. DO NOT RE-
CYCLE REJECTED NOTES!
CLOSE AND LOCK REJECT
CLOSE
AND REINSTALL IN
DISPENSER
.
3
1
2
6
STEP
ACTION
5
PLACE CURRENCY IN THE CAS-
SETTE AND SLOWLY RELEASE
THE
HOLD-BACK LATCH AL-
LOWING THE PACKER PLATE TO
MOVE
FORWARD AGAINST THE
NOTES
.
REPLENISH TDM CASSETTE(S)
(TDM-250)
LOCATE THE SPRING-
LOADED LOCKING PIN ON
UNDERSIDE
OF TRAY. PULL
PIN
DOWN AND ROTATE
SWIVEL
PLATFORM 180°
CLOCKWISE. RELEASE PIN
TO
LOCK IN PLACE.
STEP
ACTION
REMOVE THE NOTE
CASSETTE
(S). UNLOCK AND
MOVE
PACKER PLATE TO
REAR
OF THE CASSETTE.
LATCH IN PLACE WITH THE
HOLD
-BACK LATCH.
Reject cassette
Note cassettes
4
COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CAS-
SETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING ADDED TO
THE
REMAINING NOTES.
THE TOTAL OF THESE AMOUNTS WILL BE ENTERED IN
THE
“ENTER CASSETTE QUANTITY” PROMPT FOR CAS-
SETTE CLOSE PROCEDURE.
SLIDE THE CASSETTE BACK
INTO
THE DISPENSER.
PULL THE LOCKING PIN DOWN
AND
ROTATE SWIVEL PLATFORM
180° COUNTERCLOCKWISE. RE-
LEASE PIN TO LOCK IN PLACE.