Owner Manual

3
AC PoweR CoRd BRACket InstALLAtIon
- Follow the appropriate procedure to shut down your particular ATM and remove power.
- Remove your particular dispenser type. Discon-
nect cables and set it aside.
- Remove the dispenser tray from the slides.
- Loosely attach the power cable to the bracket
with the ty wraps provided. Inspect the power
cord for chafng and repair as necessary.
- Remove the mounting screws from the rear of
left side slide assembly.
- Loosen the remaining screws holding the slide
assembly, but do not remove.
- Slide the bracket behind the slide assembly and reattach the slide assembly with the longer screws pro-
vided. Tighten the remaining slide assembly screws.
Pull the ty wraps snug to secure the power cord. Cut off any excess as necessary.
RL 2000 with NMD example
InstALLAtIon PRoCeduRe
seCtIon 1