Owner Manual

3 -31
RL5000 NMD50
14. Tuck the ground wire under the clip on the
side of the dispenser. Route the power cable
through the two cable clips along the left side
of the dispenser. Route the cable around to the
rear of the dispenser and through the cable clip
on the back left side of the NMD50.
15. Route the Dispenser data cable from the
security module assembly through the two
cable clips on the right side of the NMD50
dispenser as shown.
(Dispenser removed from the unit for clarifi cation)
16. Route the Dispenser Communication Cable
across the top of the dispenser, through the
cable clip on the left side of the dispenser and
plug it into the dispenser as shown.
(Dispenser removed from the unit for clarifi cation)
Unlock the slides and push the dispenser into
the cabinet.