Owner Manual

3 -29

RL5000 NMD50

8. Install the lower closeout bracket on the 6 bolts

on the right opening. Using the 7/16” hollow

shaft but driver, install 6 hex nuts on the bolts.

Install the second closeout bracket onto the

4 bolts on the middle opening. Install 4 hex

nuts on the bolts. While tightening, ensure the

bolts and brackets are sitting ﬂ at in the upper

cabinet.

9. With the dispenser still removed from the

unit, peel the paper backing off one Panduit

Adhesive Cable Clip and adhere it to the back

right side of the NMD50 dispenser. Peel the

paper backing off another Panduit Adhesive

Cable Clip and adhere it to the front right side

of the NMD50 dispenser. Note the orientation

of the clips in the pictures.

10. Peel the paper backing off one Panduit

Adhesive Cable Clip and adhere it to the front

left side of the NMD50 dispenser. Note the

orientation of the clips in the pictures.