Owner Manual

3-28
HOLE CLOSEOUT BRACKET KIT
Vault # 03015-00798 / 03015-00212 / 03015-00841 / 03015-00851 /
03015-01841 with an NMD 50 Dispenser
**If the unit has been upgraded, skip to step #7.
5. Route the security module power cable and
the security module communication cable
through the quick release cable clip and into
the upper cabinet through the back left opening
as shown.
6. Obtain the dispenser power cable. Plug the
power cable into the unit’s power supply in the
upper portion of the cabinet. Route the cable
through the left hole opening into the lower
cabinet.
7. Install 6 bolts into one closeout bracket. Set
the bracket in place into the right opening.
Install 4 bolts, into the middle holes of the
closeout bracket, and set it in place in the
middle opening as shown. Ensure the bolts and
brackets are sitting fl at on the upper cabinet.