Owner Manual

3 -27

RL5000 NMD50

20. Route the Dispenser Communication Cable

across the top of the dispenser, through the

cable clip on the left side of the dispenser and

plug it into the dispenser as shown.

(Dispenser removed from the unit for clariﬁ cation)

Unlock the slides and push the dispenser into

the cabinet.

21. Route the security module communication and

security module power cable around the unit’s

main power cable and over the power supply

(red arrows). Plug the power cable into the

power supply.

Ensure all excess security module power and

communication cable is pulled into the upper

cabinet. Loop the security module power cable

back on itself to condense the length of the cable.

TY Wrap the cable and cut off the excess. TY

Wrap the cables on the side of the power supply

and cut off excess (green arrows).