Owner Manual

3-16
HOLE CLOSEOUT BRACKET KIT
Cabinet # 03015-00793 / 03015-00833 / 03015-01340 / 03015-00852 /
03015-00900 with an NMD 50 Dispenser
**If the unit has been upgraded, skip to step #7.
5. Route the security module power cable and
the security module communication cable
through the quick release cable clip and into
the upper cabinet through the back left opening
as shown.
6. Obtain the dispenser power cable. Plug the
power cable into the unit’s power supply in the
upper portion of the cabinet. Route the cable
through the left hole opening into the lower
cabinet.
7. Install 6 bolts into one closeout bracket. Set
the closeout bracket in place into the right
opening as shown. Ensure the bolts and
bracket are sitting fl at in the upper cabinet.