Owner Manual

3 -9
RL5000 NMD50
17. Route the Dispenser data cable across the top
of the dispenser, through the cable clip on the
left side of the dispenser and plug it into the
dispenser as shown.
(Dispenser removed from the unit for clarifi cation)
Unlock the slides and push the dispenser into
the cabinet.
18. Route the security module communication and
security module power cable around the unit’s
main power cable and over the power supply
(red arrows). Plug the power cable into the
power supply.
Ensure all excess security module power and
communication cable is pulled into the upper
cabinet. Loop the security module power
cable back on itself to condense the length
of the cable. TY Wrap the cable and cut off
the excess. TY Wrap the cables on the side
of the power supply and cut off excess (green
arrows).