Owner Manual

3 -7
RL5000 NMD50
11. Peel the paper backing off one Panduit
Adhesive Cable Clip and adhere it to the front
left side of the NMD50 dispenser. Note the
orientation of the clip in the picture.
12. Remove the cassettes from the NMD50 if
installed. Pull both slides out fully and ensure
they lock into place. Set the dispenser into
position ensuring the posts on the rails sit
securely in the handle’s notches. Reinstall the
cassettes.
13. Route the ground wire around to the front of
the dispenser. Plug the ground wire onto the
quick connect as shown.